Email: corporate@kitply.com
Email: corporate@kitply.com

Products > Kit Door Range >

Swastik Flush Doors

Swastik Flush Doors

Swastik flush doors are modern, elegant and ready to use that can be easily installed with minimum efforts to protect and beautify your dream home. They are made out of high quality wood to make them exceptionally durable and dimensionally stable with excellent tooling and finishing properties. Obviously, the doors are made with chemically treated seasoned hardwood battens and frames.

The cross bands veneers are uniformly dried to the requisite moisture content. They are then bonded with special quality Phenol formaldehyde synthetic resin as per the guidelines of IS:2202. Swastik Flush Doors are treated for total termite and borer protection. The flush doors are manufactured under strict quality control conditions that exceed the lSI specifications. The doors can be manufactured according to customized sizes too.

Specialty of Swastik Doors:

  • Manufactured with selected and high quality hard wood timber.
  • Timbers used to manufacture Doors are treated with anti-termite borer chemical before sawing.
  • Frames and battens are seasoned in advance seasoning chamber for equalize the moisture content.
  • All the frames and battens are cut through ripsaw machine and planer for equal size and thickness.
  • The width of battens and frames are wider as per the specification of BIS.
  • Extra lock rail is provided for the convenience of handle and lock fittings.
  • Special care is taken during the assembly of battens to avoid any gap inside the door.
  • High solid content water proof PF Resin is used for high strength.
  • Doors are conditioned before cutting to avoid the warping and twisting.
  • Swastik doors are finished with highly precised wide belt sander.
  • All doors are strictly tested as per the BIS guidelines.

Sizes & thicknesses:

Standard sizes available. You can choose from the door thicknesses of 30, 32, 35 mm.

Test

151 Requirement

Observed Value

Dimension

Length, Width – + 5 mm Thickness – + 1 mm

Within limits

Squareness

Deviation not more than 1 mm on a length of SOOmm

Deviation below 1mm

General Flatness

Twist. cupping, warping not to exceed 6 mm

 

Local Planeness

Depth of deviation at any point to be less than 0.5 mm

Within limits

Impact Indentation Test

Depth of Indentation not to exceed 0.2 mm

Within limits

Edge Loading Test

Deflection of edge with max. To be less than 5 mm

Within limits

Shock Resistance Test Buckling Test

No visible defect after test Initial deflection – < SO mm residual deflection – < 5 mm

No visible defects Within limits

Slamming Test

No visible damage after Test

No visible damage

Misuse Test

No deformation after Test

No deformation

Varying Humidity Test

No visible warping, twisting or de-lamination

No such defects observed

End Immersion Test

No de-lemination at the end

No de-lemination

Knife Test

Minimum Pass Standard

Excellent

Glue Adhesion Test

No de-lamination

No de-lamination

Screw Withdraw Test

Load to withdraw screw to be more than 1000 N

Load – > 1000 N